Over 15 years of experience is hidden in this audio rack.

The guiding principle behind the design of the Alu Master line was to create an uncompromising rack equipped with all the best technical solutions used by the company to date, as well as new, never-before-seen solutions. The line also addresses customers who want something beyond veneers and lacquers and appreciate modern construction materials. Therefore, the rack is based on the excellent 15th Anniversary line, but is manufactured using top-quality, precision-cast and polished aluminum plates, as well as carbon fiber, known for its excellent anti-vibration properties.

The rack features a technologically advanced design with true decoupling from adverse vibrations and resonances. This is ensured by an extremely rigid construction composed of massive components machined on top-class CNC machines and made of solid aluminum plates, slabs, and rods, supported by a very thick and massive carbon fiber lower shelf that can easily support the heaviest amplifiers and power amplifiers. The entire table is supported by top-of-the-line Ceramic Disc Hybrid anti-vibration feet, which allow for the effective decoupling of both small and very heavy loads, as well as adjustment and leveling via threaded screws. Instead of traditional shelves, precision aluminum combined with carbon fiber is used, while the 15th Anniversary Alu Master series features shelves made entirely of solid carbon fiber. Each shelf is a separate anti-vibration platform, resting on four Ceramic Disc Tablette feet (with three ceramic balls inside for decoupling), allowing for independent adjustment and leveling of each shelf, and therefore each audio component mounted on them.

Besides its unquestionable technical merits, the table also had to stand out with its original design and elegant finish, meeting the highest and most diverse customer expectations. The standard version of the table is offered in a matte black finish, with other finishes available upon request.

exclusive, hand finished real carbon fiber shelves

• sandwich construction of precisely CNC machined 76[mm] thick shelf and real carbon fiber sheets
• 550x800x136[mm] as standard size, but available on request in other dimensions
• extremely strong and stiffen shelf for small and very big load
• matt or high gloss black carbon fiber as standard

additional anti-vibration layer

• anti-vibration layer between top shelf and bottom aluminum frame for additional and the best quenching of resonances

solid high grade aluminum frame

• precisely CNC machined legs made of high grade selected solid aluminum 100×50[mm] bars for the best reduction of unwanted resonances, vibration control and quenching of vibrations
• exclusive black structural paint as a standard (other colors available on request) protected against finger prints and easy for cleaning
• extremely strong construction for small and very big load

top range ceramic disc hybrid feet

• 4 top range ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances
• allow for easy and precisely leveling of platform

The 15th A SE WBR replaces the 10th A SE WBR, an exclusive product line designed for the company’s 10th anniversary in 2019.

The guiding principle behind this exclusive line was to design an uncompromising rack equipped with all the best technical solutions used in the Wood Block Rack line at the time, with the difference being that the support frame was modified and made entirely of precision-cast aluminum plates and bars, rather than prefabricated aluminum profiles.

The rack features a technically advanced design with true decoupling from adverse vibrations and resonances. This is ensured by an extremely rigid construction composed of massive components machined on top-class CNC machines and made from solid aluminum plates, bars, and rods, supported by a very thick and massive lower shelf that can easily support the heaviest amplifiers and power amplifiers. The entire rack is supported by top-of-the-line Ceramic Disc Hybrid anti-vibration feet, which allow for the effective decoupling of small and very heavy loads, as well as adjustment and leveling via threaded screws. The shelves are the familiar veneered or painted versions from the Wood Block Rack line, thinned to 30 mm and also available with carbon fiber for excellent vibration damping. Each shelf is a separate anti-vibration platform, resting on four Ceramic Disc Tablette feet (with three ceramic balls inside), allowing for independent adjustment and leveling of each shelf, and therefore each audio component mounted on them.

Besides its unquestionable technical merits, the rack also had to stand out with its original design and elegant finish, meeting the highest and most diverse customer expectations. Therefore, it is offered in a wide range of matte or high-gloss lacquered veneers and a full palette of RAL and NCS colors, including metallic paints. Everything is hand-finished to meet the highest customer expectations. Upon request, we can also offer exclusive automotive paint finishes, such as those from Porsche or Bentley.

(product replace 10th A SE WBFP)

15th ANNIVERSARY SE WBFP BADGE

exclusive, hand finished shelves

• sandwich construction of precisely CNC machined 76[mm] thick top and 25[mm] bottom shelves additionally supported by carbon fiber sheet layer on the top
• 500x500x125[mm] as standard size, but available on request in any other dimensions you need…even 2000×600[mm]
• available in about 100 different matte or high gloss hand finished wooden veneers or as painted matte or high gloss in all RAL colors
• extremely strong and stiffen shelf for small and very big load

additional carbon fiber sheet top plate

• carbon fiber sheet on the top for additional and the best quenching of resonances
• matt or high gloss black carbon fiber as standard (other colors on request)

anti-vibration soft suspension system

• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by soft suspension, anti-vibration system between top and bottom shelves and ceramic feet “tablette” mounted  under each shelf
• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by ceramic feet “tablette” mounted under each shelf and carbon fiber sheets on the top for the best quenching of resonances

ceramic disc tablette feet

• 4 ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances as compilation of 4 carefully chosen of different properties materials
• 3 ceramic balls inside each foot
• adjustable height (each foot can be regulated separately)
• precisely leveling of platform
• high grade precisely CNC machined parts

When designing the Wood Block Rack in 2010, I used all my previous knowledge, experience, and suggestions and comments from customers. The main assumption was, of course, to develop the concept of decoupling using ceramic balls. I knew that I did not want it to be another cabinet on the market made of kitchen countertops or other boards on pipes or turned rollers with spikes, but a technically advanced design with true decoupling from adverse vibrations and resonances.
So I designed a very rigid structure made of massive properly selected “C” profiles with a base on a very thick and massive lower shelf that can easily support the heaviest amplifiers or power amplifiers. The entire table is based on top Ceramic Disc Hybrid anti-vibration footers, allowing for the transfer and effective decoupling of small and very large loads, as well as its adjustment and leveling using threaded screws. Instead of classic shelves, I used proven platforms from the Wood Block Slim line. So each of the shelves is exactly this platform, resting on 4 Ceramic Disc Tablette footers (inside which decoupling takes place using 3 ceramic balls) allowing for the independent adjustment and easy leveling of each of the shelves, and therefore each of the audio components installed on them.
In addition to its unquestionable technical values, the table was also to stand out with its original design and elegant finish that would meet the highest and most diverse expectations of customers. It is therefore offered in a myriad of wood veneers lacquered in matt or high gloss and in the entire palette of RAL or NCS colours, including metallic paints. Everything is finished by hand to meet the highest customer requirements. Upon request, it can also be finished with exclusive car paints, such as Porsche or Bentley.
The Rack is available in two main series – 500 (with shelves 500×500[mm]) and 550 (with shelves 550×550[mm]), as single-sided, double-sided and triple-sided, as well as two-level, three-level or four-level. At the customer’s request, all dimensions can also be individually adjusted.

When designing the Wood Block Rack in 2010, I used all my previous knowledge, experience, and suggestions and comments from customers. The main assumption was, of course, to develop the concept of decoupling using ceramic balls. I knew that I did not want it to be another cabinet on the market made of kitchen countertops or other boards on pipes or turned rollers with spikes, but a technically advanced design with true decoupling from adverse vibrations and resonances.
So I designed a very rigid structure made of massive properly selected “C” profiles with a base on a very thick and massive lower shelf that can easily support the heaviest amplifiers or power amplifiers. The entire table is based on top Ceramic Disc Hybrid anti-vibration footers, allowing for the transfer and effective decoupling of small and very large loads, as well as its adjustment and leveling using threaded screws. Instead of classic shelves, I used proven platforms from the Wood Block Slim line. So each of the shelves is exactly this platform, resting on 4 Ceramic Disc Tablette footers (inside which decoupling takes place using 3 ceramic balls) allowing for the independent adjustment and easy leveling of each of the shelves, and therefore each of the audio components installed on them.
In addition to its unquestionable technical values, the table was also to stand out with its original design and elegant finish that would meet the highest and most diverse expectations of customers. It is therefore offered in a myriad of wood veneers lacquered in matt or high gloss and in the entire palette of RAL or NCS colours, including metallic paints. Everything is finished by hand to meet the highest customer requirements. Upon request, it can also be finished with exclusive car paints, such as Porsche or Bentley.
The Rack is available in two main series – 500 (with shelves 500×500[mm]) and 550 (with shelves 550×550[mm]), as single-sided, double-sided and triple-sided, as well as two-level, three-level or four-level. At the customer’s request, all dimensions can also be individually adjusted.

exclusive, hand finished shelves

• sandwich construction of precisely CNC machined 76[mm] thick top and 25[mm] bottom shelves
• 480x440x125[mm] as standard size, but available on request in any other dimensions you need…even 2000×600[mm]
• available in about 100 different matte or high gloss hand finished wooden veneers or as painted matte or high gloss in all RAL colors
• extremely strong and stiffen shelf for small and very big load

anti-vibration soft suspension system

• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by soft suspension, anti-vibration system between top and bottom shelves and ceramic feet “tablette” mounted  under each shelf
• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by ceramic feet “tablette” mounted under each shelf for the best quenching of resonances

ceramic disc tablette feet

• 4 ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances as compilation of 4 carefully chosen of different properties materials
• 3 ceramic balls inside each foot
• adjustable height (each foot can be regulated separately)
• precisely leveling of platform
• high grade precisely CNC machined parts

exclusive, hand finished shelves

• sandwich construction of precisely CNC machined 76[mm] thick top and 25[mm] bottom shelves additionally supported by carbon fiber sheet layer on the top
• 500x500x125[mm] as standard size, but available on request in any other dimensions you need…even 2000×600[mm]
• available in about 100 different matte or high gloss hand finished wooden veneers or as painted matte or high gloss in all RAL colors
• extremely strong and stiffen shelf for small and very big load

additional carbon fiber sheet top plate

• carbon fiber sheet on the top for additional and the best quenching of resonances
• matt or high gloss black carbon fiber as standard (other colors on request)

anti-vibration soft suspension system

• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by soft suspension, anti-vibration system between top and bottom shelves and ceramic feet “tablette” mounted  under each shelf
• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by ceramic feet “tablette” mounted under each shelf and carbon fiber sheets on the top for the best quenching of resonances

ceramic disc tablette feet

• 4 ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances as compilation of 4 carefully chosen of different properties materials
• 3 ceramic balls inside each foot
• adjustable height (each foot can be regulated separately)
• precisely leveling of platform
• high grade precisely CNC machined parts

exclusive, hand finished shelves

• precisely CNC machined 38[mm] thick shelves
• 480×440[mm] standard size (other sizes available on request)
• available in about 100 different matte or high gloss hand finished wooden veneers or as painted matte or high gloss in all RAL colors
• extremely strong and stiffen shelves for small and very big load

anti-vibration soft suspension system

• the best reduction of unwanted resonances and vibration control in big mass of the shelf supported additionally by ceramic feet “tablette” mounted under platform
• additional soft suspension system under each ceramic foot for even better quenching of resonances

ceramic disc tablette feet

• 4 ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances as compilation of 4 carefully chosen of different properties materials
• 3 ceramic balls inside each foot
• adjustable height (each foot can be regulated separately)
• precisely leveling of platform
• high grade precisely CNC machined parts

exclusive, hand finished shelves

• precisely CNC machined 38[mm] thick shelves
• 480×440[mm] standard size (other sizes available on request)
• available in about 100 different matte or high gloss hand finished wooden veneers or as painted matte or high gloss in all RAL colors
• extremely strong and stiffen shelves for small and very big load

ceramic disc tablette feet

• 4 ceramic feet under each shelf for the best separation of each shelf and audio component on its, vibration control and reduction of unwanted resonances as compilation of 4 carefully chosen of different properties materials
• 3 ceramic balls inside each foot
• adjustable height (each foot can be regulated separately)
• precisely leveling of platform
• high grade precisely CNC machined parts

…the best for heavy and extra heavy stuff!

Top range of ceramic disc family Ceramic Disc Hybrid is the best for heavy and extra heavy audio components, speakers, turntables, stands, racks, platforms and audio furniture.

Excellent for replacing original footers mounted by producers in audio components, speakers etc. Sophisticated CNC machining technology, carefully selected, high grade materials about different mechanical and physical properties and super hard ceramic balls guarantee the most effective vibration control, suppression of unwanted resonances and the best listening experiences.

Mounted as standard in all Reference, Anniversary and Wood Block Rack line products.

Using (as option) additional M8 screws allow the installation of the Ceramic Disc Hybrid in many ways and directly to the audio components. If your audio component/stand/speaker has its own spikes, you can also install them on the footers without disconnecting the original spikes – simply insert the component with spikes into the black holes in the center of the disks.

Availability and finish
Sets of 3 or 4 feet, packaged in elegant box with protective foam insert.
Each set has their own unique serial number and certificate of authenticity signed by founder.
Finishing – black, natural gloss silver. Other on request.

Dimensions

• Outside diameter 78[mm]
• Height 45[mm]
• Thread M8
• Maximum load 0-600[kg] (set of 3 pieces), 0-800[kg] (set of 4 pieces)

A choice of reviewers
Designed in about year of 2007 Ceramic Disc Classic is the first footer from the range of ceramic anti-vibration feet family, perfectly suited for work with wild range of audio components – a specially sensitive ones, as CD’s DAC’s servers, tube devices, turntables, etc.
With 19 carefully selected high grade materials about different physical and mechanical properties, which each foot is assembled off, precisely CNC machining and super hard ceramic balls, Ceramic Disc Classic guarantee the most effective vibration control and suppression of unwanted resonances and the best listening experiences.
It is also Product of the Year 2021 by HiFi + (UK) or Best Buy (HiFi Choice) and the choice of reviewers of 6moons, Highfidelity, HiFi Choice, The Ear or Hifistatement and these feet are used by them in their reference audio systems during tests of audio equipment.
Thousands of these footers has been sold since its premiere in 2009 and make their owners happy continuously.

Availability and finish
Sets of 3 feet, packaged in elegant box with protective foam insert.
Each set has their own unique serial number and certificate of authenticity signed by founder.
Finishing – silver gloss, black gloss. Other on request.

Dimensions

• Diameter of the base/plate 68[mm]
• Diameter of the top cap 48[mm]
• Height 45[mm]
• Maximum load 0-150[kg] (set of 3 pieces)

The best for heavy audio components, speakers, turntables, stands, racks, platforms and audio furniture.
Excellent for replacing original footers mounted by producers in audio components, speakers etc.
Sophisticated, precisely CNC machining technology, carefully selected high grade materials about different physical and mechanical properties and super hard ceramic balls guarantee the most effective vibration control and suppression of unwanted resonances and the best listening experiences.

Using (as option) additional M6 or M8 screws allow the installation of the Ceramic Disc Fat Foot in many ways and directly to the audio components. If your audio component/stand/speaker has its own spikes, you can also install them on the footers without disconnecting the original spikes – simply insert the component with spikes into the black holes in the center of the disks.

The uncompromising performance and high-end aesthetics of the Ceramic Disc Fat Foot have also been noticed and appreciated by world-class high-end manufacturers. After adapting the feet to their specific needs and requirements, the Ceramic Disc Fat Footers have found application in their products. (Stenheim, AudioNec, Ayon)

Availability and finish
Sets of 3 or 4 feet, packaged in elegant box with protective foam insert.
Each set has their own unique serial number and certificate of authenticity signed by founder.
Finishing – silver gloss, black gloss. Other on request.

Dimensions

• Diameter of the base/plate 68[mm]
• Diameter of the top bearing 48[mm]
• Height 45[mm]
• Thread M6/M8
• Maximum load 0-240[kg] (set of 3 pieces), 0-320[kg] (set of 4 pieces)

The Best for semi-heavy audio components, speakers, turntables, stands, racks, platforms and audio furniture and where as short as possible footers are needed/required.
Excellent for replacing original footers mounted by producers in audio components, speakers etc.
 Sophisticated, precisely CNC machining technology, carefully selected high grade materials and super hard ceramic balls guarantee the most effective vibration control and suppression of unwanted resonances and the best listening experiences.

Using (as option) additional M6 screws allow the installation of the Ceramic Disc Slim Foot in many ways and directly to the audio components. If your audio component/stand/speaker has its own spikes, you can also install them on the footers without disconnecting the original spikes – simply insert the component with spikes into the black holes in the center of the disks.
It is also The most wanted component 2016 by The Stereo Times and the choice of reviewers of Hifistatement, The Stereo Times or HiFiKnights and these feet are used by them in their reference audio systems during tests of audio equipment.

Availability and finish
Sets of 3 or 4 feet, packaged in elegant box with protective foam insert.
Each set has their own unique serial number and certificate of authenticity signed by founder.
Finishing – silver gloss, black gloss. Other on request.

Dimensions

• Diameter of the top bearing 48[mm]
• Outside diameter 59[mm]
• Height 25[mm]
• Thread M6
• Maximum load 0-150[kg] (set of 3 pieces), 0-200[kg] (set of 4 pieces)

High aesthetics and uncompromising performance – unattainable for other products in this price range.
The main idea behind the Ceramic Disc TH was to create a universal, high-class product at the lowest possible price, so that every music lover could afford it… and it worked!

Ceramic Disc TH means high aesthetics and uncompromising performance – unattainable for other products in this price range.

The Best for light and semi heavy audio components, speakers, turntables, stands, racks, platforms and audio furniture.
Excellent for replacing original footers mounted by producers in audio components, speakers etc.
Precisely CNC machining technology, carefully selected high grade materials and super hard ceramic balls guarantee the most effective suppression of unwanted resonances and best listening experiences.

Using (as option) additional M6 screws allow the installation of the Ceramic Disc TH in many ways and directly to the audio components. If your audio component/stand/speaker
has its own spikes, you can also install them on the footers without disconnecting the original spikes – simply insert the component with spikes into the black holes in the center of the disks.

High aesthetics and uncompromising performance – unattainable for other products in this price range, have been also noticed and appreciated by world-class high-end manufacturers and Ceramic Disc TH has been used in the high-class equipment and devices they produce. (Engstrom, AudioNec)

Dimensions:

• Outside diameter 48[mm]
• Height 30[mm]
• Thread M6
• Maximum load 0-90[kg] (set of 3 pieces),
  0-120[kg] (set of 4 pieces)

…there is a lot of cable stands manufacturers, but only one in the world where the vision and dream of the client is 100% fulfilled.
Only Franc Audio Accessories offers all products – rack, platforms and even cable stands in exactly the same finish, and the finishes are endless – from beautiful mat or high gloss lacquered veneers, through varnishes from the Ral or NCS palette, to metallic varnishes from exclusive limousines and racing cars.

A solid and stable veneered or painted base with dimensions of 100x100x38 [mm] will provide support for your cables – it will certainly not move or fall over … it will not even twitch!
The upper part of the stand, made of precisely CNC machined aluminum and separated from wooden base with a layer of damping material will additionally protect your valuable cables of any cross-section – round, flat, rectangular, each – up to diameter of 40 [mm].

Dimensions

• Base 100x100x38[mm]
• Total height 98[mm]
• Max. cable diameter 40[mm]

Made of elegant carbon fiber, known for its excellent anti-vibration properties, and a suitably hard yet flexible rubber pad, Carbon Protective Pads will perfectly protect your furniture from scratches and dents, while also acting as another separator and insulator for your audio equipment from unwanted and uncontrolled resonances.

Dimensions

• Diameter 50[mm]
• Height ~3.5[mm]